How do you reset a Haier washer dryer combo?

If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.

Why is my Haier dryer not working?

Check the dryer belt to determine if it is broken. If the belt is broken, replace it. If you have a gas dryer, unplug the dryer from the wall and plug something else into the outlet to determine if the outlet is working. If you have an electric dryer, check the home circuit breaker or fuses.

How do you manually unlock a Haier washer dryer combo?

Power off the machine and wait around 3 minutes and the door will automatically unlock, then the door can be opened. If there is some water inside the machine please select “spin /drain” function and start to let the water go out of machine. Then power off the machine and wait around 3 minutes. The door can be opened.

How do I fix error E3 on my Haier washing machine?

The screen displays ”E3” with alarm. Reason 1: Is the laundry put unevenly in the washing machine? Solution: Redistribute the laundry evenly. Close the top lid and press the START/PAUSE button.

Why does my Haier dryer keep stopping?

If the dryer stops during a cycle, check the following: Make sure the door is closed and latched securely. Check the power supply. Electric dryers require a separate 220-volt outlet, 30 amp dual breaker or two 30 amp fuses. Make sure the front of the dryer is not blocked causing it to overheat.

Where is the thermal fuse on a Haier dryer?

blower housing
Common solutions for: Haier Dryer not heating. The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models.

Why is my washer dryer locked?

The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray).

What is error 3 on Haier washing machine?

Question: The screen displays “E3” Answer: The washing machine does not spin.

What is E3 error?

The E3 error code displays when an Abnormal Operation Protection Error has occurred, and activates to protect the unit from damage. This error code will require service.