AdministratorWhat is TiAL MVS?
The TiAL® MV-S Wastegate is the most compact 38mm wastegate on the market today. Standing just 3.7″ high, this external wastegate can be mounted in very tight locations. With two upper and three lower air ports you won’t even have to rotate the actuator to get to the air lines.
How much HP can a 38mm wastegate handle?
500-560hp
Drlee50. If it’s located properly, 38mm will flow enough to keep you in the 500-560hp range with low or high boost.
Who makes TiAL wastegate?
TiAL Sport
100% made is USA. Color anodized 6061-T651 aluminum actuator (Silver, Red, Blue, Purple, Black)….*Full-Race also stocks TiAL 44mm wastegate flanges, view the accessories section for more info.
| SKU | MVR |
|---|---|
| Weight | 5.000000 |
| Brand | TiAL Sport |
| Brands | TiAL Sport |
How do I choose a wastegate?
Below is a simple guide to help you:
- A Big Turbo/Low Boost = Bigger Wastegate.
- A Big Turbo/High Boost = Smaller Wastegate.
- A Small Turbo/High Boost = Smaller Wastegate.
- A Small Turbo/Low Boost = Bigger Wastegate.
Is a 38mm wastegate good?
Re: Best wastegate 38mm? ( The Turbosmart Ultragate is the best wastegate on the market right now. The ultra is made entirely of 253ma, which is a steel that as virtually no carbon in it. Since the is no carbon it won’t collect deposits and gunk up. This means you can also run race gas in it and it won’t gunk up.
What size wastegate should I use?
The more exhaust gas the wastegate vents, the slower the turbine wheel will spin. For a turbocharged car that sees primarily street use, most people think the smaller 38mm wastegate would work best, and although it is not a bad choice, ultimately the 44mm would work better for most street applications.
How can you tell if TiAL is real?
If you look closely at the real wastegate you will see three grooves coming from the middle to the outside across all the ridges. These grooves are not present in the fake wastegate. There are also differences in the center as well as the side profile that can be seen in the photos.
Where should I put my wastegate?
The ideal location for the wastegate is as close to the turbine housing as possible, and in a manner that provides a good flow path into the wastegate. If this is not possible, the next best location is at (or just after) the exhaust collector and again, in a manner that provides good flow into the wastegate.